Forum de l'association CIMES Index du Forum Forum de l'association CIMES
Infos et débats écologiques en Pays Mellois
 
 FAQFAQ   RechercherRechercher   Liste des MembresListe des Membres   Groupes d'utilisateursGroupes d'utilisateurs   S'enregistrerS'enregistrer 
 ProfilProfil   Se connecter pour vérifier ses messages privésSe connecter pour vérifier ses messages privés   ConnexionConnexion 

Electrical Hazard, Steel Toe and Composite Toe Sho

 
Poster un nouveau sujet   Répondre au sujet    Forum de l'association CIMES Index du Forum -> L'écologie sur le Ouebbe
Voir le sujet précédent :: Voir le sujet suivant  
Auteur Message
lonwaysafety



Inscrit le: 11 Avr 2017
Messages: 7

MessagePosté le: Ven Mai 19, 2017 7:38 am    Sujet du message: Electrical Hazard, Steel Toe and Composite Toe Sho Répondre en citant

Can Electrical Hazard (EH) Safety Shoes have a Steel Toe? And are Composite Safety Toe, Electrical Hazard (EH), Safety Shoes better, or safer than, Steel Toe, Electrical Hazard (EH), Safety Shoes?

Electrical Hazard (EH) Safety Shoes can be made with either a Steel Toe, a Composite Toe, or an Aluminum Toe…actually,[url=http://www.safetyshoesbuy.com/safety-footwear/safety-toe/]Steel Toe Slip Resistant Boots[/url], any type material safety toe is safe,[url=http://www.safetyshoesbuy.com/safety-footwear/dress/]Steel Toe Dress Shoes[/url], as long as it meets the ASTM safety toe standard. The safety toe material has nothing to do with the Electrical Hazard (EH) properties of a safety shoe. The reason is that the safety toe sits on top of the outsole of the shoe, which insulates it from the floor. The ASTM Standards (ASTM F2412-05 and ASTM F2413-05) that specify the shoe specifications and testing procedures do not require the safety toe to be any particular material.

Very Important to Understand: Electrical Hazard (EH) Safety Shoes are only supposed to be used only as a secondary source of protection in an Electrical Hazard (EH) environment, where employees may be subject to open electrical circuits. (ASTM F2413-05 Sec. 5.5.4 & Sec 5.5.2)

About the only way that a Steel Toe could be hazardous is if the person wearing them was standing on his toes, which would bring the steel toe in contact with the floor. If the person is kneeling, his steel toes may be touching the floor; but the knee is touching, too. An accidental, electrocuting circuit probably would go through the knees into ground since that would be the path of least resistance for the electrical circuit.

Believe me when I tell you that if the very intelligent researchers,[url=http://www.safetyshoesbuy.com/safety-footwear/clogs/]Chef Shoes[/url], who designed the ASTM tests and specifications for Electrical Hazard (EH) Safety Shoes, believed that there was any chance that Steel Toe, Electrical Hazard (EH) Safety Shoes were not as safe as a Composite Toe, Electrical Hazard (EH) Safety Shoe, they would not allow them to be made. The tests show that the Steel Toe Electrical Hazard (EH) Safety Shoes pass the ASTM Standard Electrical Hazard (EH) Test just as well and are just as safe as the Composite Toe, Electrical Hazard (EH) Safety Shoes.

Electrical Hazard (EH) Safety Shoes can be made with any type safety toe as long as the safety shoe passes the Impact and Compression safety toe tests and the Electrical Hazard (EH) test.
_________________
lonway safety
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    Forum de l'association CIMES Index du Forum -> L'écologie sur le Ouebbe Toutes les heures sont au format GMT
Page 1 sur 1

 
Sauter vers:  
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum


Powered by phpBB © 2001, 2005 phpBB Group
Traduction par : phpBB-fr.com